TradeAssistIQHome

Samsung Heat pump fault E910

Water temperature sensor detached

Heat pump

What it means

Water outlet pipe temperature sensor is disconnected or detached

Likely causes

  1. Water outlet temperature sensor connector loose
  2. Wiring disconnected
  3. Connector corrosion
  4. Damaged wiring

Where to start

  1. Check sensor connector for loose connections
  2. Verify wiring continuity
  3. Check for visible damage to wiring

The full answer, free

  • 1 more check in order
  • The readings and component tests from the manual
  • How to put it right, step by step
  • The manual page for this fault (page 85), right under the answer
Ask about E910 freeCreate a free account

Safety: Isolate the outdoor unit and any backup heater, and give the inverter capacitors time to discharge before you open the electrics. Anything on the refrigerant circuit needs F-gas certification.

From the Samsung manual for the Heat pump. Check the model on the data plate before you order parts.

Other Samsung Heat pump fault codes