TradeAssistIQHome

Tucson Equinox fault 6C

Air locked (pump runs but delivers no water)

Shower pump

What it means

Pump runs but delivers no water because the system is air locked.

Likely causes

  1. Air Locked
  2. Air lock in pipework
  3. Expansion and contraction of hot and cold-water pipework causing connections to work-loosen
  4. Internal component commissioning causing temporary odour
  5. Shaft seal run-in period causing moisture discharge
  6. Lime scale build-up from extended non-operation

Where to start

  1. Check for air locks, examine the pipework layout to check for high points
  2. Retighten connections that may have work-loosened during initial weeks/months of operation
  3. Check for small discharge of moisture from shaft seal during run-in period

The full answer, free

  • 4 more checks in order
  • The readings and component tests from the manual
  • How to put it right, step by step
  • The manual page for this fault (page 15), right under the answer
Ask about 6C freeCreate a free account

Safety: Isolate power and water, and prove dead before you open or test the pump.

From the Tucson manual for the Equinox. Check the model on the data plate before you order parts.

Other Tucson Equinox fault codes