TradeAssistIQHome

Tucson Equinox fault 7.F

Strainer filters are blocked/debris (insufficient flow rate)

Shower pump

What it means

Insufficient flow rate caused by blocked or debris-laden strainer filters.

Likely causes

  1. Strainer filters are blocked/debris
  2. Debris in strainer filters
  3. Gradual drop in flow rate or performance indicates strainer blockage
  4. Debris or foreign bodies entering the pipeline
  5. Reduced water feed supply through blocked strainer filters

Where to start

  1. Check strainer filters
  2. Check filter strainers on inlet washers periodically
  3. Clean strainers if flow rate drops

The full answer, free

  • 7 more checks in order
  • The readings and component tests from the manual
  • How to put it right, step by step
  • The manual page for this fault (page 15), right under the answer
Ask about 7.F freeCreate a free account

Safety: Isolate power and water, and prove dead before you open or test the pump.

From the Tucson manual for the Equinox. Check the model on the data plate before you order parts.

Other Tucson Equinox fault codes