Vokera Pinnacle System fault FIL

Low water pressure (warning signal)

Gas boiler

What it means

Warning signal shown when pressure value falls below 0.5 bar. Displayed as 'FIL LOW WATER PRESSURE CHECK THE HTG SYSTEM'. The boiler continues to operate normally but filling is recommended.

Likely causes

  1. System pressure below 0.5 bar
  2. Minor system leak
  3. System pressure outside optimal range of 1.0-1.5 bar
  4. System water pressure drop below required minimum value

Where to start

  1. Check system water pressure against minimum required value
  2. Check Water pressure reading for system pressure verification
  3. Check and possibly reset: GAS - GAS TYPE, d52 - P1 GAS VALVE (with boiler in OFF), APL - POWER, HYDRAULIC CONFIGURATION, WATER PRESSURE TRANSDUCER (SERVICE), MIN FAN SPEED, MAX FAN SPEED, MAX FAN SPEED HTG, RANGE RATED

The full answer, free

  • The readings and component tests from the manual
  • How to put it right, step by step
  • The manual page for this fault (page 6), right under the answer

Safety: Isolate gas and power before you open the case. If you have been into the gas side, do a tightness test, and a combustion and flue check before you hand back. Gas Safe (UK) or RGI (Ireland) work only.

From the Vokera manual for the Pinnacle System. Check the model on the data plate before you order parts.

Other Vokera Pinnacle System fault codes