TradeAssistIQHome

Midea Heat pump fault J2E

Over-temperature protection

Heat pump

What it means

Fan module over-temperature protection triggered.

Likely causes

  1. Refrigerant leak from container or system
  2. Damage to cables
  3. Excessive number of connections
  4. Terminals not made to original specification
  5. Damage to seals
  6. Incorrect fitting of glands

Where to start

  1. Identify contaminated leakage area
  2. Assess wind direction for evacuation
  3. Inspect casing for alteration affecting protection level

The full answer, free

  • 2 more checks in order
  • How to put it right, step by step
  • The manual page for this fault (page 150), right under the answer
Ask about J2E freeCreate a free account

Safety: Isolate the outdoor unit and any backup heater, and give the inverter capacitors time to discharge before you open the electrics. Anything on the refrigerant circuit needs F-gas certification.

From the Midea manual for the Heat pump. Check the model on the data plate before you order parts.

Other Midea Heat pump fault codes