Ideal Logic Air fault 134

What it means

Indicates a heat pump fault that has repeatedly occurred.

Likely causes

1. Recurring underlying heat pump fault not resolved
2. Frost accumulation on evaporator due to outdoor humidity/temperature conditions
3. Electrical interference from inadequate cable separation
4. Water ingress from improperly routed cables or loose cable glands
5. Dwelling room temperature dropped to ≤8°C
6. Inadequate corrosion inhibitor dosing leading to gradual system performance deterioration
7. Missing or undersized system filter allowing debris into primary circuit
8. Dwelling ambient temperature at or below 8°C
9. Ambient air temperature at or below 1°C
10. Refrigerant leak from circuit

Where to start

1. Read Primary flow temp, Hot water temp, Outside temp, Primary water flow, Compressor %, CH1 Pump, CH2 Pump, Diverter valve, Immersion heater status directly from home screen to verify system operation
2. Identify 'Alarm' symbol to indicate a plant error
3. Identify 'Maintenance/Special operations' symbol for maintenance message or special operation feedback